Product details
QS Small Submersible Electric Pump
Product Description
Flow: 10-250 m3/h
Lift： 5-121m
Caliber： φ30~φ200mm
Power： 2.2-7.5kw
Temperate： ≤30℃，QS（R）hot submersible pump≤80℃
whatsapp:+8619937408623
mailbox: yaantelope@xcyaan.com
Product Detail
QS Small submersible electric pump Overview:
QS Small submersible electric pump widely used in farmland irrigation, spray irrigation, well water drawing, water supply and drainage for industrial or civil buildings, also the water drawing system for hills, mountain areas, drainage of stagnant water in low-lying areas, urban and rural mining water supply, drainage and other water conservancy facilities. Its Characteristics are that the motor and pump are assembled into a simple structure, easy to install, maintain or disassemble, covering little area. It works in a safe and reliable way, will not pollute water source.
QS Small Submersible Pump Service Conditions:
1. Power: 50 Hz frequency and voltage of 380 volts (allowing deviations +5%, -10%) three-phase AC power. Pumps should be totally immersed under water for operation, diving depth not less than 0.5 meters, no more than 5m.
2. Water source: common non-corrosive water, sand content no more than 0.02%.
3. PH: 6.5 ~ 8.5, temperature of the water being pumped shall be no higher than 30 ° C.
4. Before usage, the chamber of the motor must be filled with clean water; running with water shortage is strictly prohibited.
Characteristics:
(1). motors and pumps assembled into one,
(2). simple structure,
(3). easy installation and removal , small area,
(4). simple using and maintenance , safe and reliable operation,
(5). no pollution to water, etc.
Parameters
| Model | Flow (m³/h) | Lift (m) | Power (kw) | Diameter (mm) |
| QS65-25/1 | 65 | 25 | 7.5 | 0 |
| QS300-5/1 | 300 | 5 | 7.5 | 0 |
| QS250-7/1 | 250 | 7 | 7.5 | 0 |
| QS100-18/1 | 100 | 18 | 7.5 | 0 |
| QS100-9/1 | 100 | 9 | 4 | 0 |
| QS40-11/1 | 40 | 11 | 2.2 | 0 |
| QS80-11/1 | 80 | 11 | 4 | 0 |
| QS32-52/4 | 32 | 54 | 7.5 | 0 |
| QS32-26/2 | 32 | 26 | 4 | 0 |
| QS65-15/1 | 65 | 15 | 4 | 0 |
| QS65-7/1 | 65 | 7 | 2.2 | 0 |
| QS65-10/1 | 65 | 10 | 3 | 0 |
| QS250-5/1 | 250 | 5 | 5.5 | 0 |
| QS80-20/1 | 80 | 20 | 7.5 | 0 |
| QS50-16/1 | 50 | 16 | 4 | 0 |
| QS50-30/2 | 50 | 30 | 7.5 | 0 |
| QS40-40/2 | 40 | 40 | 7.5 | 0 |
| QS40-30/2 | 40 | 30 | 5.5 | 0 |
| QS40-21/1 | 40 | 21 | 4 | 0 |
| QS40-25/1 | 40 | 25 | 5.5 | 0 |
| QS40-18/1 | 40 | 18 | 3 | 0 |
| QS30-50/3 | 30 | 50 | 7.5 | 0 |
| QS32-48/4 | 32 | 48 | 7.5 | 0 |
| QS30-40/3 | 30 | 40 | 5.5 | 0 |
| QS25-65/5 | 25 | 65 | 7.5 | 0 |
Packaging
Packaging of Products;
Henan Yaan Pump Products are packed and labeled according to the regulations and customer's requests.
Great care is taken to avoid any damage which might be caused during storage or transportation.
In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.
1)Yaan Standard
2)Customization
Previous>>> QJ Deep Well Submersible Pump
The product has good tensile strength, heavy weight, and fine workmanship. The most important thing is that it can be used directly by plugging it in, which is very convenient and the noise is not too loud.
The quality of the motor is very good, and the packaging is also very good. The pure copper motor has a strong excitation force, stable operation, and durability.
The combination of excitation force and output is appropriate, with a large excitation force and low mechanical noise. Strong resistance vibration is adopted, and maintenance is simple.
The motor is durable and has been used continuously for 48 hours after installation. It has full power and is said to be the original manufacturer with good quality and is trustworthy.
